neroforfree.blogg.se - Victron battery monitor app

#Victron battery monitor app update#
#Victron battery monitor app android#
#Victron battery monitor app Bluetooth#
#Victron battery monitor app series#

Prevents increased current draw in case of an alarm. A residual current of 10mA, for example, may damage a 200Ah battery if the system is left in a discharged state during more than 8 days. The battery will be damaged if the remaining capacity reserve is drawn from the battery. After shutdown due to low cell voltage, the capacity reserve is 1Ah per 100Ah battery capacity. We recommend Victron's Battery Balancer to maximize the service life of series-connected lead-acid batteries.Ĭurrent Consumption: 0.7Ah per month (1mA) 12V and 0.6Ah per month (0/8mA) Especially Li-ion batteries have no capacity left when discharged until low voltage shutdown.

When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. One bad cell or one bad battery can destroy a large, expensive battery bank. Also included are a separate front bezel for a square or round display appearance, a securing ring for rear mounting and screws for front mounting. Included: RJ12 Cable (10m) and battery cable with fuse (2m) no other components needed. The shunt connects to the monitor with a standard RJ12 telephone cable.

#Victron battery monitor app update#

Update the software when new features become availableĪll electrical connections are to the quick connect PCB on the current shunt.Monitor all important data on a single screen.

#Victron battery monitor app Bluetooth#

Use a Smartphone or other Bluetooth enabled device to: 10m UTP cable ( for connection between shunt and monitor).With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance. (101.With Bluetooth-in, the BMV Smart is ready for the internet of things (IoT) era. The SmartShunt IP65 connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery. Relay: 60V, 1A NO (can be inverted to NC).Power consumption: 1mA 12V (0.7Ah / month) - without relay or backlight.Suitable for use with 12V or 24V systems.V.E Direct communication port for integration with other Victron equipment.Mid-point voltage monitoring option for 1 battery or bank.Temperature monitoring option for 1 battery or bank.Quick-install menu and detailed setup menu.Suitable for 2 batteries or banks of batteries.Can be configured for use with other shunts.Programmable relay that can be energised/de-energised in an alarm condition.

Auto-detection of nominal system voltage.

Auto re-calibration each time the battery is fully charged (to ensure accuracy is maintained).

Displays: Voltage / Current / Power / Ah Consumed / State of Charge (%) / Time-to-go / Total kWh charged/discharged.

The voltages either side of the mid-point are compared and the deviation displayed in % and V, with a programmable alarm providing a warning that the deviation is too great. This allows detection of a bad cell or a bad battery which can potentially destroy the other connected batteries by over-charging.

#Victron battery monitor app series#

Mid-point voltage monitoring of one bank of batteries connected in series (or banks of series-connected batteries joined in parallel).

Battery capacity reduces as temperature increases so the sensor measurement can be fed into the monitor to adjust displayed capacity based on temperature.

Temperature monitoring of a single battery/bank using an optional temperature sensor.

#Victron battery monitor app android#

Once the battery monitor is panel-mounted in a suitable location (with or without the supplied square bezel) it is connected to the shunt's PCB using a single RJ12 data/power cable and programmed using the on-board menu.īuilt-in Bluetooth allows you to display many of the monitor' features via any Android or Apple device or laptop and most settings of the monitor can be configured with the VictronConnect appĪs an alternative to monitoring the voltage of a 2nd battery the BMV-712 shunt's 2nd/auxiliary input can be used for the following: The shunt is fitted in-line with the leisure/house battery's negative cable, the starter/auxiliary battery's negative cable is connected to the shunt's output and fused +ve supplies are taken from each battery into the shunt's 2 inputs. It essentially acts as a battery 'fuel gauge' for anyone needing to keep a check on the performance of their battery or battery bank and can monitor the voltage of a 2nd battery. The information displayed by the BMV-712 includes voltage, current draw, Ah consumed, % charge level, 'time-to-go' and it features a programmable alarm and in-built relay to trigger external equipment under an alarm condition (note: information displayed for 2nd battery is voltage only). The BMV-712 'Smart' is Victron's high precision multi-function battery monitor with built-in Bluetooth. Victron BMV-712 'Smart' Battery Monitor - Bluetooth Built-In (2 Batteries/Banks) - BAM030712000